Specifications:
Aerodynamic parameters * |
||
Length |
1086 mm (42,75 inch) |
|
Wing span |
1490 mm (58.66 inch) |
|
Wing area |
19.65 dm² (304.6 sq in) |
|
Wing airfoils |
originally from Joe Wurtz |
|
Wing aspect ratio |
11,3 |
|
Stabilizer area |
2,14 sq dm (33.17 sq in) |
|
Stabilizer airfoils |
originally from Joe Wurtz |
|
Stabilizer aspect ratio |
1,42 |
|
Vertical Stabilizer area |
2 sq dm (31 sq in) |
|
Vertical Stabilizer airfoils |
originally from Joe Wurtz |
|
Vertical Stabilizer aspect ratio |
1,08 |
|
Control surfaces |
Ailerons (flaps), rudder, elevator |
|
Weight characteristics ** |
||
Fuselage weight |
32.5 gr (1.15 oz) |
|
Nose cone |
7.3 gr (0.26 oz) |
|
Aileron pushrods, bowden pushrods, reinforcement plates for aileron rods |
6.4 gr (0.22 oz) |
|
Weight of the wing |
101-110 gr (3.56 – 3.88 oz) |
|
Weight of the horizontal stabilizer |
5,5-6,2 gr (0.19 - 0.22 oz) |
|
Weight of the rudder |
5,8 – 6,2 gr (0.2 - 0.22 oz) |
|
Details like screws, crevices |
8 gr (0.28 oz) |
|
NT model weight |
166.5 - 176.5 gr (5.87 - 6.2 oz) | |
All Up Weight * |
218.5 - 247 gr (7.7 - 8.7 oz) |
|
Wing loading ( g/dm²) * |
11.2 - 12.6 gr/ dm² |
Contents of accessories kit:
1. Wing control horn
2. Launching peg
3. PP clamp for ballast
4. Stabilizer control horn
5. Rudder control horn
6. Torsion spring
7. Screw for fixing PP clamp for ballast (M3)
8. Screws for fixing stabilizer (2 pcs)
9. Spare screws for fixing stabilizer (2 pcs)
10. Set of screws for fixing of the wing М3х6 и М3х10 (1 spare set)
11. Cover plate for the wing horn
12. Pipes for the closing control cables
13. Wing horn shafts
Contents of part kit:
1. Wing
2. Contents of accessories Snipe kit
3. Aileron pushrods
4. Bowden tubes for pushrods
5. Reinforcement plates for aileron rods
6. Fuselage with nose cone
7. Stabilizer
8. Vertical stabilizer