SKYRC S65 AC Balance Charger/Discharger with UK Plug

Home /
Shop /
SKYRC S65 AC Balance Charger/Discharger

SKYRC S65 AC Balance Charger/Discharger

S$68.22

Qty

Availability: In stock

SKYRC S65 AC Balance Charger/Discharger with UK Plug

This product is suitable for charging and discharging LiFe/ Lilon/ LiPo/ LiHV/ NiMH/ NiCd/ PB batteries. For Pb battery, AGM Charge and Cold Charge mode are available.

Size and Weight:

Case Material: Plastic
Case Size: 118*115*45mm
Weight: 315g

Power:

Input Voltage: AC 100-240V
Charge Wattage: 65W
Discharge Wattage: 10W

Battery:

Battery Types/Cells:
LiPo/LiFe/LiIon/LiHV: 2-4 cells
NiMH/NiCd: 6-8 cells
Pb: 3-6 cells

Battery Capacity Range:
NiMH/NiCd:100-50000mAh
LiPo/LiIon/LiFe/LiHV:100-50000mAh
Pb: 100-50000mAh

Charge and Discharge:

Charge Voltage

NiMH/NiCd: Delta peak detection

LiPo: 4.18-4.25V/cell
LiFe: 3.58-3.7V/cell

LiIon: 4.08-4.2V/cell
LiHV: 4.25-4.35V/cell

Discharge Cut-off Voltage

NiMH/NiCd:0.1-1.1V/cell

LiPo:3.0-3.3V/cell
LiFe:2.6-2.9V/cell

LiIon: 2.9-3.2V/cell
LiHV: 3.1-3.4V/cell

Charge Current: 0.1A-6.0A

Discharge Current: 0.1A-2.0A
Balance Cells: 2-4 cells
Balance Current: 300mA/cell Max
Safety Timer: 1-720minutes off

Charge Method:

CC/CV for lithium types and lead(Pb) batteries Delta-peak Sensitivity for NiMH/NiCd.

SkyRC S65 is an AC input high-performance micro processor control charge/discharge station with battery management suitable for use with all current battery types, LiPo, Lilon, LiFe, NiCd, NiMH, PB and also new generation LiHV with end voltage 4.35V. It is an AC input charger/discharger with compact size. The maximum charging power of S65 is 65W with maximum charging current 6A and discharging current 2A.

Embedded XT60 Battery Connector

By embedding the XT60 battery connector in the charger, it gets more convenient & safe for charging the most popular battery with XT60 connector and avoid the possibilities of reverse polarity for it.

AGM & Cold Charge Modes for PB Battery

SkyRC S65 can charge AGM battery and also can be used for charging PB battery at very low temperatures.

Smart & Efficient Cooling System

Temperature controlled 7000rpm high speed sleeve bearing cooling fan effectively blows the air through the extruded aluminum heat sink, effectively cooling the device.

Higher Accuracy with Three Decimals for Battery Voltage

The charger firmware is highly optimized by displaying the battery voltage with three decimals during the process of charging & battery voltage measuring.

Temperature Threshold

If the temperature limit is reached, the process will be terminated.