- Balance Charge (6S LiPo)
- Program Data Store / Load
- Battery Voltage Meter
- Battery Resistance Meter
- Terminal Voltage Control
- PC Control
- Maximum Safety
- Discharge
Power Distribution
It supports power distribution, for example,Channel 1-300w, then channel 2-100W, the total power is 400W. Please note the Max power of channel 2 is 200w, but that of channel 1 is 400W.
Twin-channel Charger
SkyRC D400 allows you to charge 2 batteries (same or different) simultaneously and independently.
DC Power Supply
SkyRC D400 can supply 150 watts DC Power on channel 2. User can use it to power equipments that require DC Power. It converts standard 100-240V AC mains to 6-15V DC output.
Synchronization Mode
Employ this function, user can set both channel by channel 1, that saves much time.
PC Software for Data Analysis and Firmware Upgrade
Charge Master can start/stop charging process, and view real-time graphs of current, voltage, capacity and monitor single cell voltage.
What’s in the Box
D400
AC Power Cord
XH Adaptor
Banana connectors with XT60 connector Charging Cable
Charging Cable
Instruction Manual