KST X06N Wing Servo (0.8-1.8kg)

Availability: In stock

The KST X06N is a version of the KST X06 servo without mounting lugs (also called mounting tabs). KST delivers once again with the world beating KST X06N, their new lugless 7 mm thin servo weighing only 6.3g. Perfect for discus launched gliders (DLGs) and many smaller models. The incredibly slim casing is crafted from 7075 aluminium alloy, so not only do these servos look fantastic but they are also very rigid and robust.

The KST X06N has a hardened steel drive train and a coreless motor capable of running all the way from 3.8V to 8.4V (1S to 2S LiPo) making these WV (wide voltage range) servos will deliver the power and reliability you need. Although some say this tiny servo is too small for 1.5m DLG aileron surfaces it actually has more torque on 2S LiPo than a KST X08 has on a 1S battery.

The accessories include four strong nylon output arms, two double sided, and two single sided, one of which is low profile. This means that when the servos are mounted one in front of the other the control rod of the front one won't foul the rear one.

KST X06N Features

- Narrow lugless case to minimise space and weight
- Ultra slim 7 mm body - the thinnest metal cased servo in the world
- Compact and light weight design
- Good torque and speed
- Wide 1S to 2S LiPo voltage range
- Excellent heat dissipation
- 7075 Alloy casing
- Hardened Steel gears
- Designed for lightweight high performance RC Gliders

KST X06N Specifications
Body dimensions 20.0 mm wide x 7.0 mm thick x 16.6 mm high 0.79" wide x 0.28" thick x 0.65" high
Max dimensions 20.0 mm wide x 7.0 mm thick x 19.3 mm high 0.79" wide x 0.28" thick x 0.76" high
Stall torque (3.8V) 0.8 Kg.cm 11 oz.in
Stall torque (6V) 1.5 Kg.cm 21 oz.in
Stall torque (8.4V) 1.8 Kg.cm 25 oz.in
Weight 6.3 g 0.22 oz
Lead length 15 cm 5.9 in
Operating speed (3.8V) 0.12 sec/60°
Operating speed (6V) 0.08 sec/60°
Operating speed (8.4V) 0.07 sec/60°
Operating voltage 3.8V to 8.4V
Operating temperature -20 to +65 °C
Bearings 1 ball bearing
Gear material Hardened Steel
Case material 7075 aluminium alloy
Motor type Coreless DC motor
Working frequency 333 Hz
Dead band/resolution 2 µs
Pulse width for ± 60º 1000 - 2000 µs
Digital Yes
Programmable No
Position feedback Potentiometer
Supplied accessories 4 output arms, 2 arm retaining screws, 4 mounting screws
Optional accessories Pulley For KST X08, KST X08 Servo Arm Set, Plastic Frame only for the KST X06, Ply Frame for KST X06

Did you know?

Perfect for discus launched gliders (DLGs) and many smaller models.

KST X06N Wing Servo (0.8-1.8kg)

Double click on above image to view full picture

Zoom Out
Zoom In

More Views


Torque(1):   0.8 KG.CM (3.8V)
Speed(1):   0.12S (3.8V)
Torque(2):   1.8 KG.CM(8.4V)
Speed(2):   0.07S (8.4V)
Weight:   6.3g