JR NX8931-Plus Servo
S$172.90
Qty

Availability: In stock

JR NX8931 Pro Ultra Torque MG WV Smart Servo

The new NX8931 features updated firmware, optimized for performance and efficiency, and a new modified and reinforced top case for increased durability.

Featuring automatic output detection, these new JR Smart Servos can be used with either conventional (PWM) or XBus installations for ease and flexibility. Programming is simple via your XBus-equipped JR XG-series DMSS transmitter, and not only can servo direction and travel be adjusted, but it is now possible to fine tune holding power, stopping speed, dead band, starting power, total servo travel, create an alarm if servo load exceeds a user-set limit, enable slow start, as well as enhanced failsafe features to help protect your servos in the event of signal loss.

The NX8931 also features JR's unique automatic output detection, so it can be used in standard configuration with either conventional (PWM) or XBus installations for ease and flexibility with virtually any brand of equipment.

If you're looking to take the performance of your model to unprecedented heights, take a look at the new NX8931 servos from JR and feel the difference the new JR NX Smart Servos can provide.


Specifications

- JRPSNX8931 Pro Ultra Torque MG WV
- Torque: 319.2 (4.8V)/411.0 (6.0V)/506.8 (7.4V)
- Speed: 0.20 (4.8V)/0.16 (6.0V)/0.13 (7.4V)
- Dimensions (L/W/H): 1.59x0.83x1.38 in
- Weight: 2.54 oz
- Input Voltage: 4.8-8.5v
- Shaft Support: Dual Ball Bearing
- Comparable to DS8911HV




Did you know?

The new NX8931 features updated firmware, optimized for performance and efficiency, and a new modified and reinforced top case for increased durability.

JR NX8931-Plus Servo

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

BACK TO TOP