Hirobo 0301-901 XRB Electronic Helicopter (Wired)
S$130.00
Qty

Availability: In stock

HELLO HELI!
 
The Hirobo XRB Electronic Helicopter is a wired counter-rotating coaxial rotor electric RC helicopter designed for absolute beginners who are learning to fly. By simply connecting the attached adapter to a home outlet as a power source, even beginners can handle it easily. The power and control signals are sent through the access cable (4m) between the controller and helicopter body. This system has advantages such that power can be supplied stably; there is no worry about radio interference; and battery replacement or charging is not needed.

The body can be hovered freely by combining ascending and descending, back-and-forth and side-to-side, and traverse operations with the right and left sticks on the proportional control system type controller. The operating methods are the same as those of conventional radio-controlled helicopters. It is also suitable for practicing face-to-face hovering, pirouette (on-the-spot traverse), etc.

Features:
  • Reduction in size since no tail rotor is needed.
  • Hovering in a completely horizontal condition.
  • Smooth side-to-side rudder transverse.
  • High efficiency since all rotor rotations can be of a buoyant force.

Specifications:

  • Main rotor diameter: 350mm
  • Length: 360mm
  • Height: 140mm
  • Gear ratio: Also 8.625:1 (tops and bottoms)
  • Gross load: 170g (body)
  • Motor: FK-180SH x 2
  • Rotor rpm: 0 - 1900rpm
  • Hovering rpm: 1600rpm
  • Power source adapter: AC 230V
This package includes:
  • Main body: Assembled and flight-adjusted
  • Specific controller: Specifically developed for XRB series
  • Power adapter: Stable long-time flights can be made by simply connecting to a home outlet
  • Safety skids: Safe even for beginners to practice
  • Spare Main blades (3sets)



Did you know?

The Hirobo XRB Electronic Helicopter is a wired counter-rotating coaxial rotor electric RC helicopter designed for absolute beginners who are learning to fly. By simply connecting the attached adapter to a home outlet as a power source, even beginners can handle it easily. The power and control signals are sent through the access cable (4m) between the controller and helicopter body. This system has advantages such that power can be supplied stably; there is no worry about radio interference; and battery replacement or charging is not needed.

Hirobo 0301-901 XRB Electronic Helicopter (Wired)

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Hirobo 0301-901 XRB Electronic Helicopter (Wired)
  • Hirobo 0301-901 XRB Electronic Helicopter (Wired)
BACK TO TOP