HACKER MODEL Skystar Glider - Yellow

This Hacker EPP glider is supplied with a Sprint 400 (7.2V) pod-mounted brushed motor and push-fit prop so that it can be used as an electric powered 3-channel glider. It can also be assembled and flown simply as a 2-channel tow-line glider.

It is highly pre-fabricated from tough EPP. All parts are keyed together allowing assembly in a few hours using standard CA. The clearly illustrated instructions assure that even a first time builder will be successful. The model handles so well that it makes an ideal project for the novice with little or no experience.

The EPP Foam construction makes the Sky Star very resilient to crash damage. EPP breaks cleanly, which allows you to repair it with CA glue in A few minutes.

Easy to hand launch, it climbs well with the recommended power system providing flight times in excess of 15 minutes.

Features:
* An ideal design for the beginner
* Low parts count for a simple and quick build
* All-EPP construction resistant to crash damage
* Option to build as a powered (3-channel) or tow/slope (2-channel) glider
* Canopy latches securely in place, provides quick access to flight batteries and electronic equipment
* Finished in an attractive airbrushed design

Specification:
* Wingspan: 1200mm / 47.24in
* Length: 920mm / 36.2in
* Flying weight: 420g / 14.82oz
* RC functions: min 3-channel for powered version (elevator, rudder, throttle). 2-channel for unpowered version (elevator, rudder)

Contents:
* EPP airframe: fuselage, one-piece wing, tail surfaces
* Motor pod (suits 28mm dia. motor with 16mm mounting hole spacing)
* Small parts pack inc. GRP spar
* Sprint 400 brushed motor
* Gunther E-Prop 125mm x 110mm
* Comprehensive, illustrated assembly instructions

Required to complete:
* ESC: 12A brushed
* Servos: 2 x micro. Our recommendation: JP 7.5g S7.5D
* Battery: 650mAh 7-cell NiMH, or 650mAh 2S (7.4V) LiPo
* Radio System: TX/RX min 3-channel
* Standard CA glue

Our recommended 2S LiPo power set:
* Motor: A2822-9 brushless outrunner motor
* ESC: Pro 12A
* Prop: APC-E 5.5 x 4.5
* Battery: 500~800mAh 2S (7.4V) LiPo