FEATURES
FASSTEST SYSTEM:
The 18SZ transmitter has adopted the bidirectional communication system “FASSTest”. Data from the receiver can be checked in your transmitter. FASSTest is a maximum 18 channels 2.4 GHz dedicated system.
COLOR TOUCH SCREEN LCD:
T18SZ has an HVGA 4.3 inch, full-color backlit LCD touch screen. The screen is transflective which enables both indoor and outdoor visibility.
S.BUS2 SYSTEM:
By using the S.Bus2 system multiple servos, gyros and telemetry sensors are easily installed with a minimum amount of cables.
MODEL TYPES:
Multicopter. 8 swash types are available for helicopters. 7 types of main wings and 3 types of tail wings are available for airplanes and gliders. Functions and mixing functions necessary for each model type are set in advance at the factory.
LIFE BATTERY:
The 18SZ is operated by a 6.6 V/2,100 mAh Lithium Ferrite battery.
SD CARD (SECURE DIGITAL MEMORY CARD) *NOT INCLUDED:
Model data can be saved to an SD card (SD: 32MB – 2GB, SDHC: 4GB-32GB). When T18SZ transmitter software files are released, the software can be updated by using an SD card update.
EDIT BUTTON:
Two edit buttons are provided, and the operating screen can be immediately “Returned” to the HOME screen during operation. Setting operation can be performed easily by combining this button with a touch sensor.
VIBRATION FUNCTION:
Selects a function that alerts the operator to various alarms by vibrating the transmitter in addition to sounding a buzzer.
SPEECH FUNCTION:
A function is equipped which allows the system to provide telemetry data audibly. This function can also be utilized with commercially available earphones.
CONTENTS
YOUR T18SZ INCLUDES THE FOLLOWING COMPONENTS:
T18SZ Transmitter
– Air Version includes ratcheting throttle
– Helicopter Version includes smooth throttle
FT2F2100BV2 LiFe Battery* and Charger
Switch Harness
Mini Driver
*NOTE: The battery in the T18SZ transmitter does not arrive already attached to the battery connector. Please connect the battery connector before use.
TRANSMITTER SPECS
TRANSMITTER FREQUENCY:
2.4 GHz band
SYSTEM:
FASSTest18CH, FASSTest12CH, FASST MULT, FASST 7CH, T-FHSS, S-FHSS, switchable
POWER SUPPLY:
6.6 V FT2F2100BV2 LiFe battery
FREQUENCY BAND:
2.4 GHz
RF POWER OUTPUT:
100mW EIRP
Compatible receivers as of 29 June2022.
S-FHSS PROTOCOL
R2008GS
R2008SB
R2106SB
R2001SB
R2000SBM
T-FHSS TELEMETRY PROTOCOL
R3001SB
R3004SB
R3006SB
R3008SB
T-FHSS MONO (NON-TELEMETRY)
R3206SBM
R3106GF
FASST7 AND FASST MULTI
R6004FF
R6008HS
R6014HS
R6016HF
R616FFM
R617FS
R6202SBW
R6203SB
R6208SB
R6303SB
R6303SBE
FASSTest12 and FASSTest18
R7003SB
R7006SB
R7008SB
R7108SB
R7014SB
The 18SZ software caters for Airplane, Helicopter, Glider and Multicopter. In the Multicopter mode, there are pre-designated channels for Gimbal tilt, Gimbal pan and Gimbal record. The software can be updated via the SD card subsequently whenever updates are available from the official Futaba website.