DIYDrones PX4 FMU (Flight Management Unit) + IO (Input/Output) Kit
S$262.00

Availability: Coming Soon

DIYDrones PX4 FMUis a high-performance autopilot suitable for fixed wing, multi rotors, helicopters, cars, boats and any other robotic platform that can move. It is targeted towards high-end research, amateur and industry needs. PX4 is an expandable, modular system comprising the PX4FMU Flight Management Unit (autopilot) and a number of optional interface modules (PX4IO, PX4IOAR).

In addition to the versatile hardware platform, PX4 introduces a sophisticated, modular software environment built on top of a POSIX-like realtime operating system. The modular architecture and operating system support greatly simplify the process of experimenting with specific components of the system, as well as reducing the barriers to entry for new developers.

Adding support for new sensors, peripherals and expansion modules is straightforward due to standardized interface protocols between software components. Onboard microSD storage permits high-rate logging and data storage for custom applications. MAVLink protocol support provides direct integration with existing ground control systems including QGroundControl and the APM Mission Planner.

FMU Board features:

 - ARM Cortex-M4F microcontroller running at 168MHz with DSP and floating-point hardware acceleration.
 - 1024KiB of flash memory, 192KiB of RAM.
 - MEMS accelerometer and gyro, magnetometer and barometric pressure sensor.
 - Flexible expansion bus and onboard power options.
 - The kit includes a micro usb cables, four nylon spacers and a cable connector for GPS (Mediatek/uBlox)
 - Board weight, 8.10 gr

Revision notes from 1.6 to 1.7:

- Fix for SD Card function
- BMA 180 sensor removed and left unpopulated, current board will work with MPU6000 sensor.

IO Board features:

24 Mhz Cortex-M3 failsafe microcontroller
- 6-18V input, 5V / 2 A output
- Reverse polarity protection on all power inputs
- 8 high-speed servo outputs (up to 400 Hz)
- Futaba S.Bus compatible servo output
- PPM, Spektrum and Futaba S.Bus compatible receiver inputs (sum signal format, all channels on one connector)
- 2x 0-40 V, 1 A solid-state relays (MOSFET)
- 2x 5 V, 500mA current-limited, switched 5V power outputs
- Analog port with voltage divider (differential pressure sensors)
- PX4 Expansion bus (stacked on PX4FMU)
- The kit includes four nylon spacers, a power connector (not soldered), 3x9 pin headers, 3x4 pin headers and a power cable that can be soldered directly to the board or to said connector.
 -Board weight, 9.62 gr

This package includes:
  • 1 x PX4FMU (Flight Management Unit)
  • 1 x PX4IO (Input/Output module)
  • 1 x PX4 FMU GPS Adapter cable 
  • 1 x SD card plus reader
  • 1 x 2Gb Micro SD card
  • 1 x Safety Switch
  • 1 x Buzzer
  • 8 x M3x08mm Black Nylon Spacer
  • 4 x M3x5mm Black Nylon Screw 
  • 4 x M3 Black Nylon Hex Nut
  • 1 x Battery connector cable
  • 1 x 3x9 Right Angle Pin Header
  • 1 x Micro USB Cable





Did you know?

DIYDrones PX4 FMU is a high-performance autopilot suitable for fixed wing, multi rotors, helicopters, cars, boats and any other robotic platform that can move. It is targeted towards high-end research, amateur and industry needs. PX4 is an expandable, modular system comprising the PX4FMU Flight Management Unit (autopilot) and a number of optional interface modules (PX4IO, PX4IOAR).

DIYDrones PX4 FMU (Flight Management Unit) + IO (Input/Output) Kit

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • DIYDrones PX4 FMU (Flight Management Unit) + IO (Input/Output) Kit
  • DIYDrones PX4 FMU (Flight Management Unit) + IO (Input/Output) Kit
  • DIYDrones PX4 FMU (Flight Management Unit) + IO (Input/Output) Kit
  • DIYDrones PX4 FMU (Flight Management Unit) + IO (Input/Output) Kit
  • DIYDrones PX4 FMU (Flight Management Unit) + IO (Input/Output) Kit
  • DIYDrones PX4 FMU (Flight Management Unit) + IO (Input/Output) Kit
  • DIYDrones PX4 FMU (Flight Management Unit) + IO (Input/Output) Kit
BACK TO TOP