DiyDrones Pixhawk with Ublox, LED, USB and Airspeed
S$570.09

It's a multipurpose Flight Controller that works well with Mission Planner.

Features

• Advanced 32 bit ARM Cortex® M4 Processor running NuttX RTOS
• 14 PWM/servo outputs (8 with failsafe and manual override, 6 auxiliary, high-power compatible)
• Abundant connectivity options for additional peripherals (UART, I2C, CAN)
• Integrated backup system for in-flight recovery and manual override with dedicated processor and stand-alone power supply
• Backup system integrates mixing, providing consistent autopilot and manual override mixing modes
• Redundant power supply inputs and automatic failover
• External safety button for easy motor activation
• Multicolor LED indicator
• High-power, multi-tone piezo audio indicator
• MicroSD card for long-time high-rate logging

Specifications:
Microprocessor:  •32-bit STM32F427 Cortex M4 core with FPU
•168 MHz/256 KB RAM/2 MB Flash
•32 bit STM32F103 failsafe co-processor
Sensors:
•ST Micro L3GD20 3-axis 16-bit gyroscope
•ST Micro LSM303D 3-axis 14-bit accelerometer / magnetometer
•Invensense MPU 6000 3-axis accelerometer/gyroscope
•MEAS MS5611 barometer
Interfaces:
•5x UART (serial ports), one high-power capable, 2x with HW flow control
•2x CAN
•Spektrum DSM / DSM2 / DSM-X® Satellite compatible input up to DX8 (DX9 and above not supported)
•Futaba S.BUS® compatible input and output
•PPM sum signal
•RSSI (PWM or voltage) input
•I2C®
•SPI
•3.3 and 6.6V ADC inputs
•External microUSB port
Power System:


•Ideal diode controller with automatic failover
•Servo rail high-power (7 V) and high-current ready
•All peripheral outputs over-current protected, all inputs ESD protected

Weight and Dimensions:
•Weight: 38g (1.31oz)
•Width: 50mm (1.96")
•Thickness: 15.5mm (.613")
•Length: 81.5mm (3.21")



Did you know?

DiyDrones Pixhawk with Ublox, LED, USB and Airspeed

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • DiyDrones Pixhawk with Ublox, LED, USB and Airspeed
  • DiyDrones Pixhawk with Ublox, LED, USB and Airspeed
  • DiyDrones Pixhawk with Ublox, LED, USB and Airspeed
BACK TO TOP