ArduPilot Mega 2.5 Complete with uBlox GPS (Unassembled)
S$332.10
Qty

Availability: In stock

The ArduPilot Mega 2.5 is a complete open source autopilot system. It allows the user to turn any fixed, rotary wing or multirotor vehicle (even cars and boats) into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints. This version comes with the RC/Servo connectors unsoldered, so you can choose between straight or right-angled ones, both of which are included. Package includes the top-of-the-line uBlox LEA-6H GPS module.  
 
Features:
  • Arduino Compatible!
  • Includes both right angle and straight pins for I/O, allowing user to customize as needed.
  • Onboard Dataflash chip.
  • Digital compass powered by Honeywell's HMC5883L-TR chip, now included on the main board.
  • Off-board GPS uBlox LEA-6H module.
  • One of the first open source autopilot systems to use Invensense's 6 DoF Accelerometer/Gyro MPU-6000.
  • Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties.
  • Atmel's ATMEGA2560 and ATMEGA32U-2 chips for processing and usb functions respectively

About uBlox LEA-6H GPS module:

The uBlox GPS module significantly outperforms the Mediatek GPS due to the larger antenna and next-gen chipset. Recommended for multicopters and rover in particular, where GPS accuracy is paramount. The device itself is pretty straight-forward. It has active circuitry for the ceramic patch antenna, rechargeable backup battery for warm starts, and I2C EEPROM for configuration storage.


Features and specifications:
  • ublox LEA-6H module
  • 5 Hz update rate 
  • 25 x 25 x 4 mm ceramic patch antenna
  • LNA and SAW filter
  • Rechargeable 3V lithium backup battery
  • Low noise 3.3V regulator
  • I2C EEPROM for configuration storage
  • Power and fix indicator LEDs
  • ArduPilot Mega compatible 6-pin JST connector
  • Exposed RX, TX, 5V and GND pad
  • Dimensions: 38 x 38 x 8.5 mm total size
  • Weight: 16.8 grams.



Did you know?

The ArduPilot Mega 2.5 is a complete open source autopilot system. It allows the user to turn any fixed, rotary wing or multirotor vehicle (even cars and boats) into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints. This version comes with the RC/Servo connectors unsoldered, so you can choose between straight or right-angled ones, both of which are included. Package includes the top-of-the-line uBlox LEA-6H GPS module.

ArduPilot Mega 2.5 Complete with uBlox GPS (Unassembled)

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • ArduPilot Mega 2.5 Complete with uBlox GPS (Unassembled)
BACK TO TOP