menu 1
menu 2
menu 3
menu 4
menu 5
menu 6
menu 7
menu 8

Singapore Hobby Supplies Pte Ltd
Distributor of R/C Products since 1972 and Authorised Service Center for Futaba radio systems

 

 

Subscribe to our newsletter today at
Shop.singahobby.com



Search singahobby.com


Shop with us here

Electric models
3d Model
Insanefoamies
Helicopter
Glider
Parkflyer
Hacker Model-ALL
Hacker Model-Reno
Cantebury Model
Ikarus Shockflyer
Alfa Model
Freeair Model
Fliton Model
Eflite Model
Phoenix Model
RC Mart

PIXY helicopter

X400 helicopter
X450 helicopter

ZAP 400 V2 helicopter

ZAP 400 helicopter
Optional parts 1
Optional parts 2
Optional parts 3

Order Form

TREX 450XL optional parts

Micro and Mini servos

Micro extension leads

Hinge tape

Motors
Hacker brushless
Model Motors-AXI series
Himax Brushless motors
CYCLON Brushless motors
Brushed motor and Accessories
Gearboxes

Speedcontrollers

MGM Compro ESC
Brushless motor ESC
Brush motor ESC

Automatic switches

Castle Creations ESC
ESC/Motor for R/C cars

SkyTechnology ESC

Motor mount

Batteries and electric chargers

Lithium gears
Lithium batteries
Lithium charger
Lithium balancer

Battery analyser

Micro electronics

WES-TECHNIK Micros

Connectors

Accessories

Tools

 

HOBBY HORIZON MODEL

TENSOR 4D ARF

Tensor 4D ARF

Engineered by the best in the business, the Tensor's side force generators provide the necessary lift and low angles of side-slip to excel at slow knife-edge flight.

When three dimensions just aren’t enough, experienced aerobatic pilots can turn to E-flite’s new Tensor 4D ARF, the exciting foamy that won the first Electric Tournament of Champions earlier this year. Thanks to its revolutionary design by top-level Unlimited Aerobatic ace and 2004 eTOC champion George Hicks, using advanced tools such as Computer Aided Design (CAD) and Computational Fluid Dynamics (CFD), the Tensor provides extreme 3D aerobatic performance both indoors and out.

Key to the Tensor are its side force generators-vertically oriented wings that generate the necessary lift and low angles of sideslip to excel at slow knife-edge flight. Extensive carbon fiber wing supports stabilize the structure and make it extraordinarily strong, yet extremely lightweight.

The Tensor is constructed from painted laser-cut flat-foam and assembles quickly and easily in just a few hours.

FEATURES
Extreme 3D aerobatic performance indoors and outdoors
Revolutionary design by renowned aerodynamicist and eTOC champion George Hicks
Assembles quickly and easily in just a few hours
Side force generators provide lift and allow slow knife-edge flight
Extensive high-quality reinforced carbon-fiber wing and tail supports
Laser-cut flat-foam construction
Vibrant factory-painted trim scheme

SPECIFICATIONS
Wing Span: 27 in (685mm)
Overall Length: 30 in (760mm)
Wing Area: 393 sq in (25 sq dm)
Flying Weight: 9.5 oz (270 g)
Motor Size: Park 370 Outrunner Brushless
Radio: 4 channels
Servos: 3 sub-micro servos
Trim Scheme Colors: Painted blue / yellow
CG (center of gravity): 2-1/4 - 2-1/2 in (57 - 63.5 mm) Behind the leading edge at top of wing
Prop Size: 10 x 4.7
Hardware Included: Yes
Speed Control : 10+ Amps Brushless
Recommended Battery: 2-Cell 7.4V 860mAh Li-Po
Control Throw (Ailerons): 30 degree Up (use 40% expo) / 30 degree Down
Control Throw (Elevator): 60 degree Up (use 60% expo) / 60 degree Down
Control Throw (Rudder): 40 degree Right (use 50% expo) / 40 degree Left
Approx. Flying Duration: 10 minutes

 

TOP

© Copyright 1998-2007. Singapore Hobby Supplies Pte Ltd