ARTF GLUE KIT

Selection of perfect glues for construction of ARTF model aircraft. Include: 4 minutes, 20 minute, Speed Epoxy and Roket Rapid Cyno, adhesive guide, anti clog tip, glue chart for beginners and hints and tips.

FOAM BLASTER

Unique spray which makes the rapid safe bonding of foam and painted plastic parts possible without CA glue attacking them. Coat the surfaces to be bonded carefully. Use smallest amount of Roket Odorless foam safe cyano glue then to bond or "tack" them together. Works on white, blue and pink foam surfaces in conjunction with wood or foam. Works by coating protecting and activating the surface. Always check the technique beforehand on scrap foam materials.

ROKET ODOURLESS

Crystal clear, low odour grade, non blooming and safe for bonding crystal clear plastics and foam: sets 5 to 10 sec

GLUE BUSTER

Bebonder and dissolver of super glue. Releases bonded skin. Stays on site for faster debonding action.

SPEED EPOXY

2 part high strength gap filling glues with setting times from 4 mins to 1 hour. Use for high stress areas such as engine bulkheads and wing joiner.

ALIPHATIC RESIN

Yellow glue, superior to PVA, with better sanding properties. Joints are more dimensionally stable and have double the strength of many white glue.

R/C MODELLERS GLUE

Flexible, clear setting, gap filling glue for canopies. Also ideal for bonding in hinges, foam, painted and plastic surfaces.

MODEL LITE

Strong lightweight filler which sands easily. Use only where a strong joint is not required.

MICROBALLOONS

Lightweight "free flowing" white powder which is mixed with polyester or epoxy resin to make an easy sanding strong filler.

ROKET POWDER

Strenghtening powder for use with thin cyano adhesives to improve gap filling and toughness. Flows like liquid into spaces to take exact shape. Use for filling gaps where strength is needed. Sets in seconds with cyano.

AEROKOTE

A 2-part highly fuel resistant lacquer for the protection of cellulose, enamel and nitrate dope finishes. Touch dry in 5-10 minutes resulting in dust free finish. Gloss or semi-matt finishes are achieved by mixing the two.

Roket Hot

Super-thin, fast, penetrating adhesive. Sets in 1 to 5 sec.

Foam 2 Foam

Very high "tack" glue. Strong hold, allows adjustment. Dries clear, flexible. Ideal for foam aircraft aircraft. Bonds: Depron, white, blue and EPP foams, wood & plastic.