Login or Register

Measurement Tools

Siglo Servo Tester w/ CNC Case

x_DSC0094.jpg
The Siglo Servo Tester w/ CNC Case can be used as a signal generator for your Electric Speed Controller (ESC), and you can test your motor system without using a transmitter and receiver.
Siglo Servo Tester w/ CNC Case
Price: SGD$28.04
add to cart | Inquire now

Siglo Infrared Thermometer

Siglo Infrared Thermometer

Siglo Infrared Thermometer

Infrared Thermometer that can measure ranges: -50⁓380°C (-58⁓716°F)

Price: SGD$20.37

Vaavud Wind Meter for Smart Devices - Mjolnir

Mjolnir
 
Mjolnir-1
  Measuring wind speeds from 2 to 20m/s with precision of +/-4%, the device comes with a handy neoprene bag which goes whereever you go.The design of the Vaavud Mjolnir is inspired by professional cup anemometers, but with 2 cups instead of 3 cups. This makes the device pocket friendly and super rugged.



Price: SGD$60.75
add to cart | Inquire now

Vaavud Wind Meter for Smart Devices - Sleipnir

Sleipnir -1
Sleipnir-Ground test 2
  The design of the Vaavud Sleipnir wind meter is inspired by professional cap anemometers and partly by a danish developed wind tunnel with vertical blades. The carefully designed, asymmetrical rotor accelerates  slightly when the wind hits the largest surface of the turning blades.



Price: SGD$88.79
add to cart | Inquire now

Singahobby Phantom Self-tight Props Balancer

Singahobby Phantom Self-tight Props Balancer

Singahobby Phantom Self-tight Props Balancer

This is a Prop Balancing Rod for Self-Tightening Propellers on DJI aircraft, such as the Phantom 2, Phantom 2 Vision, and Vision+ Plus Quadcopters.

Price: SGD$24.30
add to cart | Inquire now

Singahobby Carbon Propeller Balancer

Singahobby Carbon Propeller Balancer-1

Propellers that are not properly balanced can cause excessive vibrations that can damage motors/engines and sometimes result in unnecessary crashes. With the Singahobby Carbon Propeller Balancer, you can now you can check for balance of any size propellers with ease and precise accuracy.  

Singahobby Carbon Propeller Balancer
Price: SGD$23.00
add to cart | Inquire now

Futaba CA-RVIN-700 External Voltage Input Cable

Futaba CA-RVIN-700 External Voltage Input Cable
The Futaba CA-RVIN-700 External Voltage Input Cable is used for connecting a Futaba Telemetry-equipped receiver (eg: R7008SB) to an Extra Voltage Port (voltage of model loading which you want to know). Package includes cable with connector, fuse, heat shrink tube and instruction manual. 
Futaba CA-RVIN-700 External Voltage Input Cable

Price: SGD$14.80

Eagle Tree System Micro Temperature Sensor

Eagle Tree System Micro Temperature Sensor
Eagle Tree System Micro Temperature Sensor



Price: SGD$13.68
add to cart | Inquire now

Eagle Tree Brushless Motor RPM Sensor V2

Eagle Tree Brushless Motor RPM Sensor V2 - 2

The Eagle Tree Brushless Motor RPM Sensor V2 works with your Data Recorder/eLogger to measure RPM via pulses from any two of the wires leading from your Electronic Speed Controller (ESC) to your motor. 

Eagle Tree Brushless Motor RPM Sensor V2
Price: SGD$20.53

Eagle Tree Guardian Stabilization Expander for OSD Pro

Eagle Tree Guardian Stabilization Expander for OSD Pro

Feather-light and about the size of a postage stamp, the inertial sensor based Eagle Tree Guardian Stabilization Expander provides world class stabilization to your fixed wing or elevon model airplane when coupled with our OSD Pro. It’s a “Guardian Eagle” for your model!  

Eagle Tree Guardian Stabilization Expander for OSD Pro
Price: SGD$75.32

Eagle Tree e-Logger V4 With Wire Leads (150A)

Eagle Tree e-Logger V4 With Wire Leads (150A)-1

Whether you’re into Electric Model Planes, Helis, Cars, Boats or other models, you need to know how your electric power system performs under actual operating conditions. The Eagle Tree e-Logger V4 is the product you need to monitor your LiPo, A123 or any other electric power system. Now the Eagle Tree e-Logger V4 comes in a heavy duty that logs pack current up to 150A

Eagle Tree e-Logger V4 With Wire Leads (150A)
Price: SGD$123.26

Singahobby Loop Wire Plier/Bender

Singahobby Loop Wire Plier/Bender-2

Singahobby Loop Wire Plier/Bender has a round and a concave nose that save you time and energy to make simple wire loops with ease. 

Singahobby Loop Wire Plier/Bender
Price: SGD$16.80
add to cart | Inquire now

Pit Lab SkyAssistant Variometer (PMR) with Motorola Talkie

Pit Lab Sky Assistant Variometer (PMR)-1
Pit Lab SkyAssistant Variometer (PMR) with Motorola Talkie-3

The Pit Lab SkyAssistant Variometer is a small on-board instrument which indicates the RC model's vertical speed by an audible signal. Lift is indicated by a pulsed tone with rate and frequency of the pulses depending on the climb rate. Sink is indicated by a low, continuous tone depending on the sink rate. Audible signal and voice messages about model state are transmitted by built-in radio transmitter and can be received on standard LPD or PMR receiver. With the included Motorola EM1003SR Talkabout walkie talkie, you can now get instant voice announcement of altitude (m or ft), on-board battery voltage and temperature (battery, engine or air) while flying your model!

Pit Lab SkyAssistant Variometer (PMR) with Motorola Talkie
Price: SGD$465.00
add to cart | Inquire now

Pit Lab SkyAssistant Variometer (PMR)

Pit Lab Sky Assistant Variometer (PMR)-1

The Pit Lab SkyAssistant Variometer is a small on-board instrument which indicates the RC model's vertical speed by an audible signal. Lift is indicated by a pulsed tone with rate and frequency of the pulses depending on the climb rate. Sink is indicated by a low, continuous tone depending on the sink rate. Audible signal and voice messages about model state are transmitted by built-in radio transmitter and can be received on standard LPD or PMR receiver. 

Pit Lab SkyAssistant Variometer (PMR)
Price: SGD$399.20
add to cart | Inquire now

Eagle Tree Optical Sensor

Eagle Tree System Optical RPM Sensor
Eagle Tree Systems Optical RPM Sensor measures your RPM without need for installing magnets. 
Eagle Tree Optical Sensor
Price: SGD$20.53
add to cart | Inquire now

Singahobby Solder Stand with Magnifier & Clip Handles

Singahobby Solder Stand with Magnifier & Clip Handles-1
Singahobby Solder Stand with Magnifier & Clip Handles-2

The Singahobby Solder Stand with Magnifier & Clip Handles is a practical tool for electronics or electrical soldering work for your hobby. It features a 2.5 inch diameter 2.5X magnifier in a steel frame with heavy cast-iron base.

Singahobby Solder Stand with Magnifier & Clip Handles
Price: SGD$16.40

OS Speed Hex Wrench Driver 1.5

OS Speed Hex Wrench Driver (1.5)_1
OS Speed Hex Wrench Driver (1.5)_3

To keep his precious engine and machine in best condition is a pride of an RC enthusiast to his beloved vehicle. OS has developed this new range of OS Speed high grade hand tools of great quality and performance.  

OS Speed Hex Wrench Driver 1.5
Price: SGD$18.00

Eagle Tree Hall Effects RPM Sensor

Eagle Tree Hall Effects RPM Sensor

Eagle Tree Hall Effects RPM Sensor uses magnets to measures RPM to 50,000+. Kit includes magnetic RPM sensor and 4 pieces of disc magnets. It is compatible with both e-Logger and Data Recorder. 

Eagle Tree Hall Effects RPM Sensor
Price: SGD$13.68

OS Speed Plug Wrench

OS Speed Plug Wrench_1
OS Speed Plug Wrench_2

To keep his precious engine and machine in best condition is a pride of an RC enthusiast to his beloved vehicle. OS has developed this high grade OS Speed Plug Wrench hand tool of great quality and performance. 

OS Speed Plug Wrench
Price: SGD$23.00
add to cart | Inquire now

AerobTec Altis V4 Altimeter

AerobTec Altis V4 Altimeter-1

New!
The AerobTec Altis v4 is a barometric altimeter designed especially to record altitude of flying R/C aircraft with additional competition functionality, integrated OLED display and additional telemetry functionality. These functions are based on rules of F5J FAI and Altitude limiting competitions such as ALES, FxJ or LMR. It has very small dimensions and a low weight. The supplied application Altis Flight Manager cannot only read the information from the device and save it to the computer in various formats but it can display it in an advanced graph and process the flight information in many ways. 

AerobTec Altis V4 Altimeter
Price: SGD$98.75
add to cart | Inquire now

RC Logger Digital Pitch Gauge

RC Logger Digital Pitch Gauge

With this RC Logger Digital Pitch Gauge, model helicopter rotor blades can be adjusted with a precision of 0.1°. Time-consuming adjustments of blade tracking on the airfield become a thing of the past with this pitch gauge. 

RC Logger Digital Pitch Gauge
Price: SGD$45.32

Eagle Tree Micro Power e-Logger V4 With Integrated Connectors

Eagle Tree Micro Power e-Logger V4 With Integrated Connectors-1
Eagle Tree Micro Power e-Logger V4 With Integrated Connectors-5

The Eagle Tree Micro Power e-Logger V4 system comes with everything you need to log, analyse, and graph mAH, Current, Wattage, Voltage and throttle position... Right out of the box!

Eagle Tree Micro Power e-Logger V4 With Integrated Connectors
Price: SGD$95.86

Singahobby BevelBox Angle Sensor

Singahobby BevelBox Angle Sensor-1
Singahobby BevelBox Angle Sensor-8

The Singhobby Bevel Box is a Mini Digital Protractor that provides digital reading of ± 180.0 degrees. With its compact size and light weight. it is very portable and definitely an indispensible tool for your RC needs. It big LCD screen has good readability. The BevelBox is magnetic underneath which allows you to attached it to any metal surface for angle measurement.

Singahobby BevelBox Angle Sensor
Price: SGD$43.00
add to cart | Inquire now

Eagle Tree Guardian 2D/3D Inertial Stabilizer

Eagle Tree Guardian 2D/3D Inertial Stabilizer-1

Back in Stock
Based on Eagle Tree's proven inertial stabilization technology, the Guardian 2D/3D Stabilizer is a  must-have product for your model. The Guardian smoothes out air turbulence, but does much more. Unlike cheap “gyro stabilizers," it provides true wing leveling capability to help recover from lost orientation! 

Eagle Tree Guardian 2D/3D Inertial Stabilizer
Price: SGD$102.70

Kontronik Single Cell Governor (SCG) Module

Kontronik Single Cell Governor (SCG) Module

The Kontronik Single Cell Governor (SCG) sensor connects to a sensor port on the KOSMIK and provides the user the benefit of intelligent battery monitoring through the balance leads. If the SCG module detects problems within a cell, it will disconnect or slow down the power from  the motor, allowing you to land safely. In addition to the added safety of intelligent battery monitoring, the Single Cell Governor also provides logging data of each cell’s voltage during use. 

Kontronik Single Cell Governor (SCG) Module
Price: SGD$75.00

Singahobby Universal Swashplate Leveling Tool

Singahobby Universal Swahplate Leveling Tool-0

The Singahobby Universal Swashplate Leveling Tool is designed to fit most RC helicopter swashplates in the market. Perfect for 90, 120, 135 or 140 size nitro (or 200 ~ 700 electric) helicopters with a variety shaft sizes (3, 3.5, 5, 8, 10 or 12mm). 

Singahobby Universal Swashplate Leveling Tool
Price: SGD$68.34

Prostar Super Z Bender

Prostar Super Z Bender
Make 90 degrees Z bends with ease using this heavy duty Prostar Super Z Bender. Its centering pin lines up with the servo arm hole helps you accurately position the Z-bend.  
Prostar Super Z Bender

Price: SGD$30.80
add to cart | Inquire now

Singahobby 2-in-1 Wire Cutter/Stripper

Singahobby 2-in-1 Wire Cutter/Stripper-1

This is a compact and handy 2-in-1 tool that combines both a wire cutter and strpper in one. The inner core of wires are not damaged with its self-adjusting stripping feature. 

Singahobby 2-in-1 Wire Cutter/Stripper
Price: SGD$31.00
add to cart | Inquire now

Singahobby Heat Sealing Iron (Inova) 240V

Prostar Heat Sealing Iron (Inova) 240V-1

Singahobby Heat Sealing Iron (Inova) features adjustable heat control for use on any shrink film or fabric covering. The shoe surface is Teflon coated for easy ironing. Cloth sock and rest stand included. 

Singahobby Heat Sealing Iron (Inova) 240V
Price: SGD$75.60
add to cart | Inquire now

Singahobby Digital Scale (500g/0.1g)

Singahobby Digital Scale (500g/0.1g)-1

The Singahobby Digital Scale has a large platform with multiple weighing modes. It features a blue back-lit high contrast display with auto shut-off. It has a weighing capacity of up to 500g with an accuracy of 0.1g. Package includes 2 clear trays and 2x AAA batteries. 

Singahobby Digital Scale (500g/0.1g)
Price: SGD$61.00
add to cart | Inquire now

Bantam e-Station Checkmaster

Bantam e-Station Checkmaster-1
Bantam e-Station Checkmaster
Price: SGD$186.30
add to cart | Inquire now

Tahmazo Thrust Meter

Tahmazo Thrust Meter - 1
Tahmazo Thrust Meter will measure the thrust of your motor from the comfort of a desktop. 
Tahmazo Thrust Meter
Price: SGD$112.08
add to cart | Inquire now

Singahobby High Sensitivity Blade Balancer

Singahobby High Sensitivity Blade Balancer-1
Singahobby High Sensitivity Blade Balancer-3

The Singahobby High Sensitivity Blade Balancer is designed for use with blades measuring 70 to 700mm long with screw holes of 2 to 5mm in diameter. It features built-in fine-tuning screws for adjustable sensitivity. 

Singahobby High Sensitivity Blade Balancer
Price: SGD$44.65

Pilot 43630 CG Measuring Tool (S)

Pilot 43630 CG Measuring Tool (S)-1

Determine your models' centre of gravity (CG) accurately with this Pilot CG Measuring Tool rather than having just a estimation with your finger. Setting your CG precisely on your models definitely improve their performance in the skies!

Pilot 43630 CG Measuring Tool (S)
Price: SGD$71.50
add to cart | Inquire now

Pilot 43631 CG Measuring Tool (L)

Pilot 43631 CG Measuring Tool (L)-1

Determine your models' centre of gravity (CG) accurately with this Pilot CG Measuring Tool rather than having just a estimation with your finger. Setting your CG precisely on your models definitely improve their performance in the skies!

Pilot 43631 CG Measuring Tool (L)
Price: SGD$148.40
add to cart | Inquire now

Prostar 4-Way Cross Wrench (8/9/10/12mm)

Prostar 4-Way Cross Wrench (8/9/10/12mm)

Prostar 4-Way Cross Wrench is one handy tool with 4 sizes in one (8/9/10/12mm).

Prostar 4-Way Cross Wrench (8/9/10/12mm)
Price: SGD$7.10
add to cart | Inquire now

Singahobby Digital On-board Mini Tachometer

Singahobby Digital On-board Mini Tachometer-1

The Singahobby Digital On-board Mini Tachometer is an indispensible tool for RC modellers in the flying field! It measures the rpm for 2, 3 or 4-bladed propellers/blades The switch selectable number of blades. With this device, modellers can evaluate their engine, motors, propellers, etc to help them fine tune their models for optimal performance. This package comes with a boom stand for mounting onto helicopters. 

Singahobby Digital On-board Mini Tachometer
Price: SGD$18.50

Singahobby Digital Vernier Caliper (Inch/Metric) Max 6"

Singahobby Digital Vernier Caliper-1
Singahobby Digital Vernier Caliper-2

This Singahobby Digital Vernier Caliper provides both imperial and metric (switchable) measurements with zeroing function at any point.

Singahobby Digital Vernier Caliper (Inch/Metric) Max 6"
Price: SGD$46.00

Eagle Tree Plastic Case for Eagle Eyes

Eagle Tree Plastic Case for Eagle Eyes
This Eagle Tree Plastic Case is designed for use with Eagle Eyes FPV Station. It has a removable top and mounts for the PowerPanel LCD display. 
Eagle Tree Plastic Case for Eagle Eyes

Price: SGD$12.95
add to cart | Inquire now

Singahobby Pushrod Measuring Tool II

Singahobby Pushrod Measuring Tool II-1
Singahobby Pushrod Measuring Tool II-2

The Singahobby Pushrod Measuring Tool II is designed for use with model helicopter building where precise pushrod measurements are required. No more estimations using inaccurate conventional methods!  

Singahobby Pushrod Measuring Tool II
Price: SGD$31.44