Login or Register

DiyDrones Pixhawk with uBlox GPS with Compass Kit, External LED, USB and Airspeed Sensor Kit

PIXHAWK W/UBLOX,LED USB & AIRSPEED
Multipurpose Flight Controller


Price: SGD$570.09

DiyDrones DF13 3 Position Connector (19cm)

DF13 connectorsIt's 190mm in length, use to connect pixhawk.


Price: SGD$4.00
add to cart | Inquire now

DiyDrones Camera with 1/3" Sony super HAD CCD

DiyDrones Camera with 1/3 Light weight, small sized camera that packs in the 1/3" Sony Super HAD CCD Sensor.
Price: SGD$93.46
add to cart | Inquire now

DIYDrones GPS Mast

DIYDrones GPS Mast

DIYDrones GPS Mast

This is light weight and easy to mount.

Price: SGD$14.02
add to cart | Inquire now

DIYDrones Pixhawk External LED & USB

DIYDrones Pixhawk External LED & USB

DIYDrones Pixhawk External LED & USB

This kit includes external LED and USB modules to connect to Pixhawk.

Price: SGD$31.78
add to cart | Inquire now

3D Robotics IRIS+ W/LIVEFEED,CASE,GIMBAL KIT

IRIS+
IRIS+
IRIS+-CASE

3DR IRIS+ is your aerial passport: all you need to get started shooting photos and videos from incredible new perspectives.

Price: SGD$2,420.56
add to cart | Inquire now

DIYDRONES Pitot Tube Kit

DIYDRONES Pitot Tube Kit-1 
DIYDRONES Pitot Tube Kit-2

Pitot Tube Kit can be used with the Airspeed Kit or any differential pressure sensor. 



Price: SGD$14.30
add to cart | Inquire now

DIYDrones 3DR Pixhawk with uBlox GPS Compass, LED/USB modules & RadioTelemetry Kit (433MHz)

DIYDrones Pixhawk with uBlox GPS Compass-1

LATEST!
Pixhawk
is an advanced autopilot system designed by the PX4 open-hardware project and manufactured by 3D Robotics. It features advanced processor and sensor technology from ST Microelectronics® and a NuttX real-time operating system, delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle. This package includes uBlox GPS compass, External LED and USB modules & RadioTelemetry Kit (433MHz).

DIYDrones 3DR Pixhawk with uBlox GPS Compass, LED/USB modules & RadioTelemetry Kit (433MHz)
Price: SGD$641.12

DIYDrones 3DR Pixhawk with uBlox GPS Compass, LED/USB modules, RadioTelemetry Kit (433MHz) & Airspeed Kit

DIYDrones Pixhawk with uBlox GPS Compass-1

LATEST!
Pixhawk
is an advanced autopilot system designed by the PX4 open-hardware project and manufactured by 3D Robotics. It features advanced processor and sensor technology from ST Microelectronics® and a NuttX real-time operating system, delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle. This package includes uBlox GPS compass, External LED and USB modules & RadioTelemetry Kit (433MHz) & Airspeed sensor Kit.

DIYDrones 3DR Pixhawk with uBlox GPS Compass, LED/USB modules, RadioTelemetry Kit (433MHz) & Airspeed Kit
Price: SGD$727.10

DIYDrones 3DR Pixhawk with uBlox GPS Compass & LED/USB modules

DIYDrones Pixhawk with uBlox GPS Compass-1

LATEST!
Pixhawk
is an advanced autopilot system designed by the PX4 open-hardware project and manufactured by 3D Robotics. It features advanced processor and sensor technology from ST Microelectronics® and a NuttX real-time operating system, delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle. This package includes uBlox GPS compass, External LED and USB modules.

DIYDrones 3DR Pixhawk with uBlox GPS Compass & LED/USB modules
Price: SGD$485.05

DIYDrones 3DR Pixhawk with Airspeed, PPM Encoder, RadioTelemetry Kit (433MHz) & uBlox GPS Compass

DIYDrones Pixhawk with uBlox GPS Compass-1

LATEST!
Pixhawk
is an advanced autopilot system designed by the PX4 open-hardware project and manufactured by 3D Robotics. It features advanced processor and sensor technology from ST Microelectronics® and a NuttX real-time operating system, delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle. This package includes Airspeed Sensor Kit, PPM Encoder, RadioTelemetry Kit (433MHz) & uBlox GPS Compass.

DIYDrones 3DR Pixhawk with Airspeed, PPM Encoder, RadioTelemetry Kit (433MHz) & uBlox GPS Compass
Price: SGD$734.58

DIYDrones 3DR Pixhawk with Airspeed & uBlox GPS Compass

DIYDrones Pixhawk with uBlox GPS Compass-1

LATEST!
Pixhawk
is an advanced autopilot system designed by the PX4 open-hardware project and manufactured by 3D Robotics. It features advanced processor and sensor technology from ST Microelectronics® and a NuttX real-time operating system, delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle. This package includes Airspeed Sensor Kit & uBlox GPS Compass.

DIYDrones 3DR Pixhawk with Airspeed & uBlox GPS Compass
Price: SGD$539.25

DIYDrones 3DR Pixhawk with Airspeed, RadioTelemetry Kit (433MHz) & uBlox GPS Compass

DIYDrones Pixhawk with uBlox GPS Compass-1

LATEST!
Pixhawk
is an advanced autopilot system designed by the PX4 open-hardware project and manufactured by 3D Robotics. It features advanced processor and sensor technology from ST Microelectronics® and a NuttX real-time operating system, delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle. This package includes Airspeed Sensor Kit, RadioTelemetry Kit (433MHz) & uBlox GPS Compass.

DIYDrones 3DR Pixhawk with Airspeed, RadioTelemetry Kit (433MHz) & uBlox GPS Compass
Price: SGD$695.33

DIYDrones DF13 5-Position Connector (30cm)

DIYDrones DF13 5 Position Connector (30cm)

This communication cable uses the Hirose DF13 series connector. It is 30 cm long and it is designed to be used on the PX4 board series.  

DIYDrones DF13 5-Position Connector (30cm)

Price: SGD$3.80
add to cart | Inquire now

DIYDrones DF13 4-Position Connector (45cm)

DIYDrones DF13 4-Position Connector (45cm)
This communication cable uses the Hirose DF13 series connector. It is 45 cm long and it is designed to be used on the PX4 and APM 2.6 series autopilots.  
DIYDrones DF13 4-Position Connector (45cm)

Price: SGD$5.00
add to cart | Inquire now

DIYDrones DF13 6-Position Connector (45cm)

DIYDrones DF13 5 Position Connector (30cm)
This communication cable uses the Hirose DF13 series connector. It is 45 cm long and it is designed to be used on the PX4 board series.  
DIYDrones DF13 5-Position Connector (30cm)
Price: SGD$5.00

DIYDrones 3DR Pixhawk with uBlox GPS Compass & RadioTelemetry Kit (433MHz)

DIYDrones Pixhawk with uBlox GPS Compass-1
DIYDrones 3DR RadioTelemetry Kit (433MHz)-1

LATEST!
Pixhawk
is an advanced autopilot system designed by the PX4 open-hardware project and manufactured by 3D Robotics. It features advanced processor and sensor technology from ST Microelectronics® and a NuttX real-time operating system, delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle. This package includes uBlox GPS Compass & RadioTelemetry Kit (433MHz). 

DIYDrones 3DR Pixhawk with uBlox GPS Compass & RadioTelemetry Kit (433MHz)
Price: SGD$609.35

DIYDrones 3DR Pixhawk with uBlox GPS Compass

DIYDrones Pixhawk with uBlox GPS Compass-1

LATEST!
Pixhawk
is an advanced autopilot system designed by the PX4 open-hardware project and manufactured by 3D Robotics. It features advanced processor and sensor technology from ST Microelectronics® and a NuttX real-time operating system, delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle. This package includes uBlox GPS Compass

DIYDrones 3DR Pixhawk with uBlox GPS Compass
Price: SGD$453.27

DIYDrones 3DR uBlox GPS with Compass Kit

DIYDrones 3DR uBlox GPS with Compass Kit-1

This new design incorporates the HMC5883L digital compass, providing a convenient method of mounting the compass away from sources of interference that may be present in the confines of the vehicle. This uBlox GPS with Compass Kit 3DR's best GPS module, significantly outperforming the Mediatek GPS due to the larger antenna and next-gen chipset. 

DIYDrones 3DR uBlox GPS with Compass Kit
Price: SGD$141.12

DIYDrones 3DR RadioTelemetry Kit (433MHz)

DIYDrones 3DR RadioTelemetry Kit (433MHz) New-1
Updated Version
These DIYDrones 3DR radios provide an air-to-ground data link between the autopilot and your ground station laptop or tablet. Follow this guide to install the radios on your plane, copter, or rover. 3DR Radios arrive ready to use. Just mount and connect to view real-time data from your drone. This is the updated version.
DIYDrones 3DR RadioTelemetry Kit (433MHz)
Price: SGD$148.70

DIYDrones APM 2.6 (Side Entry) with uBlox GPS & Compass (XT60)

DIYDrones APM 2.6 (Side Entry) with uBlox GPS & Compass (XT60)-1

This updated version DIYDrones APM 2.6 (Side Entry) includes a uBlox GPS module with a compass built in. The APM 2.6 is a complete open source autopilot system and the best-selling technology that won the prestigious 2012 Outback Challenge UAV competition. It allows the user to turn any fixed, rotary wing or multi-rotor vehicle (even cars and boats) into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints. This APM is assembled and ready for use. 

DIYDrones APM 2.6 (Side Entry) with uBlox GPS & Compass (XT60)
Price: SGD$314.84

DIYDrones APM 2.6 (Top Entry) with uBlox GPS & Compass

DIY Drones APM 2.6 (Top Entry) with uBlox GPS & Compass-1
This updated version DIYDrones APM 2.6 (Top Entry) includes a uBlox GPS module with a compass built in. The APM 2.6 is a complete open source autopilot system and the best-selling technology that won the prestigious 2012 Outback Challenge UAV competition. It allows the user to turn any fixed, rotary wing or multi-rotor vehicle (even cars and boats) into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints. This APM is assembled and ready for use.  
DIYDrones APM 2.6 (Top Entry) with uBlox GPS & Compass

Price: SGD$314.84

DIYDrones APM 2.5/2.6 Case Top Entry

DIYDrones APM 2.5/2.6 Case Top Entry

This is the official case for the APM 2.5 or 2.6 system with top entry.  It's designed to keep your electronics safe while looking great at the same time! The enclosure is made of black translucent ABS plastic. It protects your electronics while allowing access to all pins and connectors. 

DIYDrones APM 2.5/2.6 Case Top Entry
Price: SGD$5.75

DIYDrones APM 2.6 Only (Side Entry)

DIYDrones APM 2.6 Only (Side Entry)-1

This is the updated version DIYDrones APM 2.6 (Side Entry). The APM 2.6 is a complete open source autopilot system and the best-selling technology that won the prestigious 2012 Outback Challenge UAV competition. It allows the user to turn any fixed, rotary wing or multi-rotor vehicle (even cars and boats) into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints. This APM is assembled and ready for use. 

DIYDrones APM 2.6 Only (Side Entry)
Price: SGD$307.20

DIYDrones 3DR Video/OSD System

DIYDrones 3DR Video/OSD System-1

When safely operating autonomous vehicles, situational information is power. Having a live video stream from your aircraft with superimposed live telemetry data is the ultimate in situational awareness. This DIYDrones 3DR Video/OSD System features everything you need to outfit your vehicle with onboard video transmission and telemetry overlay. 

DIYDrones 3DR Video/OSD System
Price: SGD$282.10

DIYDrones PX4 FMU (Flight Management Unit) + IO (Input/Output) Kit

DIYDrones PX4 FMU (Flight Management Unit) + IO (Input/Output) Kit-1

DIYDrones PX4 FMU is a high-performance autopilot suitable for fixed wing, multi rotors, helicopters, cars, boats and any other robotic platform that can move. It is targeted towards high-end research, amateur and industry needs. PX4 is an expandable, modular system comprising the PX4FMU Flight Management Unit (autopilot) and a number of optional interface modules (PX4IO, PX4IOAR).

DIYDrones PX4 FMU (Flight Management Unit) + IOAR (AR.Drone adapter board) Kit
Price: SGD$262.00

Arduino APM 2.5+ with uBlox GPS Assembled

Arduino APM 2.5+ with uBlox GPS Assembled

This new version of the ArduPilotMega 2.5 system features a newly designed enclosure and Power Module with integrated 5.3V regulator and current and voltage sensing.  This package comes with a uBlox GPS module

Arduino APM 2.5+ with uBlox GPS Assembled
Price: SGD$316.25

DIYDrones Hexacopter Power Distribution Board

DIYDrones Hexacopter Power Distribution Board
The DIYDrones Hexacopter Power Distribution Board can be used with any frame. It distributes the power from the flight battery to six ESC's to power the motors. Now comes pre-assembled! No need to solder connectors or wires! 
DIYDrones Hexacopter Power Distribution Board

Price: SGD$30.30

DIYDrones APM MinimOSD Rev 1.1

DIYDrones APM MinimOSD Rev 1.1
DIYDrones APM MinimOSD Rev 1.1-2

MinimOSD, a minimal Arduino-based on-screen display board.

It's tailored for use with ArduPilot Mega and the MAVlink protocol, and designed to be as compact as possible. It's main components are an ATmega328P 8 bit microcontroller with an Arduino bootloader, and a MAX7456 monochrome on-screen display. Programming is done through an FTDI-compatible 6-pin cable (optional).  

DIYDrones APM MinimOSD Rev 1.1
Price: SGD$80.60

DIYDrones PX4 Flow

Arduino PX4 Flow-1

PX4Flow is an optical flow smart camera. It has a native resolution of 752×480 pixels and calculates optical flow on a 4x binned and cropped area at 250 Hz (bright, outdoors), giving it a very high light sensitivy. Unlike many mouse sensors, it also works indoors and in low outdoor light conditions without the need for an illumination LED at 120 Hz (dark, indoors). It can be freely reprogrammed to do any other basic, efficient low-level computer vision task. 

DIYDrones PX4 Flow
Price: SGD$201.50

DIYDrones Quadcopter Power Distribution Board

DIYDrones Quadcopter Power Distribution Board

This DIYDrones Quadcopter Power Distribution Board can be used with any frame. It distributes power from the flight battery to ESCs to power the Quad's motors.  Now comes pre-assembled! No need to solder connectors or wires. 

DIYDrones Quadcopter Power Distribution Board
Price: SGD$24.20

Arduino 2.4GHz Fin Antenna

Arduino 2.4GHz Fin Antenna-1

This Arduino 2.4GHz Fin Antenna is designed to work within 2400-2500 MHz range.  It's very small and lightweight, making it very easy to adapt and install on your system.  Tested range is about 0.75 miles (1.2Km) without signal loss during FPV use at 2.4GHz and 10mW. 

Arduino 2.4GHz Fin Antenna
Price: SGD$48.15
add to cart | Inquire now

Arduino APM 2.5+ with Mediatek GPS V2.0 Assembled

Arduino APM 2.5 with Mediatek GPS V2.0 Assembled

This new version of the ArduPilotMega 2.5 system features a newly designed enclosure and Power Module with integrated 5.3V regulator and current and voltage sensing.  This package comes with a Mediatek GPS v2.0 module

Arduino APM 2.5+ with Mediatek GPS V2.0 Assembled
Price: SGD$247.50

Arduino Telemetry Adapter Cable for APM 2.5 (Radio, OSD)

Arduino Telemetry Adapter Cable for APM 2.5 (Radio, OSD)
This cable is an adapter between any items that have FTDI pin out configurations (MinimOSD, Air side radios, etc) and a Hirose DF13 5 position connector receptacle (APM 2.5, PX4 FMU). Basically this cable lets you connect your APM 2.5 board with telemetry, OSD boards or Xbee adapters.  Cable length is 15cm. 
Arduino Telemetry Adapter Cable for APM 2.5 (Radio, OSD)

Price: SGD$2.20

DIYDrones MediaTek MT3329 GPS 10Hz + Adapter Basic

DIYDrones MediaTek MT3329 GPS 10Hz + Adapter Basic

This state-of-the-art 66-channel DIYDrones MediaTek MT3329 GPS is built small and compact. An ideal GPS device for the Ardupilot Mega. 

DIYDrones MediaTek MT3329 GPS 10Hz + Adapter Basic
Price: SGD$54.30

DIYDrones Adapter cable for GPS

DIYDrones Adapter cable for GPS

DIYDrones Adapter cable for GPS. Measures 15cm in length. 

DIYDrones Adapter cable for GPS

Price: SGD$2.80

DIYDRones Remzibi OSD 3DR

DIYDRones Remzibi OSD 3DR-0

DIYDRones Remzibi's OSD is an On-Screen-Display unit that is used along with a video transmitter and video receiver on First-Person-View setups for Remote Control planes.

First-Person-View gives you a view from inside the cockpit of the R/C plane. If you connect video goggles or a monitor/TV to the output of the Video Receiver, you can actually see as if you were sitting inside the plane. 

DIYDRones Remzibi OSD 3DR
Price: SGD$136.70

DIYDrones XtreamBee Board (No XBee included)

DIYDrones XtreamBee Board (No XBee included)-1

The DIYDrones XtreamBee Board is the most advanced and competitive XBee interface board you will find! It's breadboard compatible, has 4 status LED's (one selectable to display ASC or RSSI), built-in 3.3V power regulator, configuration solder jumpers and an unique feature that allows you set the device as Master or Slave FTDI mode with a simple slide of a switch!  

DIYDrones XtreamBee Board (No XBee included)
Price: SGD$34.00

DIYDrones XtreamBee USB Adapter

DIYDrones XtreamBee USB Adapter-3 

This DIYDrones XtreamBee USB Adapter is a simple to use, USB to serial base unit for the XBee line. Plug the unit into the XBee Explorer, attach a mini USB cable, and you will have direct access to the serial and programming pins on the XBee unit. 

DIYDrones XtreamBee USB Adapter
Price: SGD$34.00

DIYDrones Camera Cable Connector

DIYDrones Camera Cable Connector
This cable features a 3 pin housing to connect into a camera on one side and a 3 pin female connector on the other end. Cable length: 26cm. 
DIYDrones Camera Cable Connector

Price: SGD$2.84
add to cart | Inquire now