Login or Register

Jeti MU3 (3 Voltage Monitor)

Share/Bookmark
   
Jeti MU3 (3 Voltage Monitor)
The Jeti MU3 sensor (3 Voltage Monitor) can be used for model on board monitoring of up to three voltages. With the aid of the MU-3 sensor the voltage can be monitored (minimum and maximum values) and the sensor may warn the user if set parameters are violated. Informations of the sensor are transmitted by the Duplex System to the user.
Specifications:
Dimensions:36x20x5
Weight with cables:18g
Tempertature Range min.:-10 to + 85 degrees celcius
Supply voltage:3.5V to 8.4V
Average Current32mA
Measurement Accuracy;1%
Current Consumption:8mA

The Duplex System utilizes the 2.4GHz band for communication, which not only transmits model controlling data to the model but also receives useful model data back at the transmitter end. Data collected during operation are transmitted in real time and the actual condition of measured values can be evaluated on the JETIBOX LCD display.

Jeti Duplex 2.4 GHz system
The innovative DUPLEX 2.4 GHz system by JETI Model for radio controlled models of all types working on the 2.4GHz band. Problems with interference and frequency control will be history, and operation on the 2.4GHz band will change your approach to radio control forever. In designing the DUPLEX system, Jeti Model's aim has always been to improve on what is offered by other radio control systems currently on the market. Jeti Model offer you very sophisticated equipment offering reliable – duplex – secure – digital transmission of information.
Jeti Diagram
Main advantages of the JETI Model 2.4 GHz DUPLEX System:
  • No crystals used – no frequency checks required
  • You do not have to buy a new transmitter
  • Easy and reliable binding of receivers to transmitters (you can use endless numbers of receivers with every transmitter)
  • High interference rejection provides safe operation - even in an interference rich environment
  • Digital data transmision ensures distortion free transfer of information to the model
  • Maximum safety
  • Can be used with all types of models (aircraft, boats, cars)
  • Two way communication between receiver and transmitter
  • Telemetric data transfer to the model operator in real time
  • High sensitivity of receivers and high output of transmitters ensures visibility limit range
  • Self-correcting coding of information
  • The DUPLEX system can handle up to 16 input channels with the use of two receivers
  • Two aerial receivers ensure continuous control of models in any position, and eliminate blind spots caused by signal reflection
  • Quality plotting of transmission channels and antenna position at start up, providing a low probability of transmission on busy or interference rich channels
  • Immediate response of the receiver output to changes in transmitter controls
  • Transmitter modules are fitted with an alarm triggered by the receiver in dangerous situations (low receiver battery voltage, poor reception, etc.)
  • The DUPLEX system provides simultaneous operation of more than one receiver on the same transmitter (listening-in)
  • Real time data display and easy programing using the JetiBox
  • Failsafe with adjustable time delay
  • Receiver outputs can be changed to match any transmitter channel input
  • All of the receivers allow the setting of mixers, servo reverse, ATV, servo slow for each output on the receiver, even with the simplest of transmitters
Price: SGD$56.30