Login or Register

Jeti Model ADVANCE Plus Programming Card

Share/Bookmark
   
Jeti Model Advance Plus Programming card-1
The Jeti Model ADVANCE Plus Programming Card is designed for you to make easy settings for Jeti Model ADVANCE Plus ESCs and also to extend their programming possibilities.
Jeti Model Advance Plus Programming card-2
Jeti Model ADVANCE Plus Programming Possibilities:
  • Brake on - Brake is active
  • Brake off - Non-active brake
  • Timing low (soft timing) - For 2, 4 & 6 pole motors. This timing gives the maximum efficiency
  • Timing high (hard timing) - Strongly recommended for outrunners
  • Throttle curve linear - Half throttle is equal to 60% of maximum RPM
  • Throttle curve logarithm - Half throttle is equal to 80% of maximum RPM
  • ACCU NiXX - Power pack type NiCd or NiMH
  • ACCU Li-XX - Power pack type Li-Pol or Li-Ion
  • Cut off voltage high - Cut off is set to 0.9V per cell for NiXX, 3.0V per cell for Li-xx
  • Cut off voltage low - Cut off is set to 0.7V per cell for NiXX, 2.7V per cell for Li-xx
  • Cut off hard - Motor is fully turned off immediately after reaching cut off voltage
  • Cut off slow down - Motor turns off slowly by power reduction
Price: SGD$9.10