The DJI Phantom 2 Vision+ is simple to set up and super easy to fly, making it the first aerial filmmaking system for everyone. Now you can shoot fully stabilized video from the sky, right out of the box. A built-in high precision 3-axis camera stabilization system brings a whole new level of smoothness to your aerials and gives you total creative freedom in the sky. This package includes a second Phantom 2 battery! This promotion is available while stock lasts.
DJI Phantom 2 Vision Plus RTF Quad Promotion (With 1 Extra Battery)
Price: S$1,774.77add to cart | Inquire now
The auxiliary advantage.
With the debut of the Phoenix Edge series of ESCs the next evolution in speed controller technology has arrived. The Edge series introduces a user programmable auxiliary wire capable of functions modelers have only dreamed of, until now. The Castle Creations Phoenix Edge HV 80 ESC is designed for 600 Class helicopters and 1/4 scale fixed wing airplanes.
Castle Creations Phoenix Edge HV 80 ESC
Price: S$192.40add to cart | Inquire now
The DJI 3-axis Zenmuse H3-3D gimbal takes the unparalleled 3-axis stabilization of professional Zenmuse systems and brings them to the GoPro Hero 3 and 3+ camera for smoother Phantom videos than ever before. It is easy to install, lightweight and ideal for everything from extreme sport to filmmaking. This gimbal is designed for use with DJI A2, Wookong-M, Naza-M, Naza-M V2 flight stabilizers. The Gimbal Control Unit (GCU) is included.
DJI Zenmuse H3-3D for Naza/A2
Price: S$500.00add to cart | Inquire now
With the new firmware, new attitude stabilization algorithm and optimized control, the DJI Naza-M V2 provides better flight performance, even without the GPS module. It has a brand new, smoother take-off algorithm and supports double spring TX; every time you let go of the throttle stick it will hover. The Naza PMU V2 has enhanced BEC functionality and provides extendable CAN BUS ports, which can support iOSD, Zenmuse H3-2D gimbal (pitch control). Support is also included for optional Bluetooth LED module to allow parameter adjustment via a mobile APP (future firmware upgrade required for this functionality).
DJI Naza-M V2 with GPS Autopilot System for Multi-Rotor
Price: S$384.00add to cart | Inquire now
DJI iOSD Mini is specially designed for DJI autopilot system during the FPV flight or other aero-modeling activities. It can superimpose video and OSD information in real time, to bring users more involved flight experience.
DJI iOSD Mini
Price: S$97.20add to cart | Inquire now
Back in Stock
This is the original 5200mAh lithium battery designed for use with the DJI Phantom 2 Vision and Phantom 2 RTF Quads.
DJI Phantom 2 Vision Battery
Price: S$175.00add to cart | Inquire now
The Phantom 2/Phantom 2 Vision Prop Guard is designed to protect your propellers from collision. It will surely bring you more fun of flight, no matter you are a newcomer or an experienced pilot. It is easy to attach, lightweight, safe and reliable. Includes 10m of white thread to go round the guard for better protection.
DJI Phantom 2 Vision Propeller Guard (Part No. 28)
Price: S$35.00add to cart | Inquire now
This DJI Charger (Part No. 2) is designed to charge 5200mAh lithium battery used with the DJI Phantom 2 Vision and Phantom 2 RTF Quads. Package includes charger, AC cable, micro USB cable and 3x charge plug adapters.
DJI Phantom 2 Vision Charger (Part No. 2)
Price: S$54.45add to cart | Inquire now
Back in stock
Castle Creations BEC Pro is designed for use with Castle Thunderbird, Phoenix HV, Phoenix Ice, Phoenix, Mamba and Sidewinder series controllers. It eliminates the need for a receiver and servo battery pack.
Castle Creations BEC PRO
Price: S$53.50add to cart | Inquire now
SBach ARF is an excellent 30cc low-wing aerobatics and 3D performance model that is built adopting the latest 3D design features. This airplane is designed by professional engineers and built by skilled craftsmen. It features high structural strength, lightweight construction, two-piece removable wings and stabs, etc. The Sbach can be powered by a 30cc gaoline engine or 90-110 nitro fuel.
Singahobby SBach ARF 30cc (90-110 Nitro)
Price: S$431.70add to cart | Inquire now
Pilot Pimenta is a 2m lightweight balsawood glider that features a 3 split-type wing, large centre spoiler, carbon wing spar and a conventional cross-tail. This glider is both rigid and lightweight thanks to carbon and laser-cut balsawood material used. It takes off to the sky with a flying weight of just 700g. Made in Japan.
Pilot Pimenta 2m Glider
Price: S$132.00add to cart | Inquire now
The OS Engine GF30 is THE power plant for models designed for 120-150 glow engines or 20cc gas engines. Realistic sound makes it ideal for scale aircraft — and aerobatic and sport models will benefit from its gasoline-sipping economy and impressive torque!
OS GF30 Engine with F-6040 Silencer
Price: S$767.70add to cart | Inquire now
FPV flying is now available in one complete convenient package! No more having separate monitor, receiver, diversity, and patch antenna...
The Skyzone FPV Goggles comes with built-in 5.8Ghz dual diversity receiver and dual antennas optimized for the best video transmission. It supports 4 Bands and a total 32 channels. The goggles's high resolution widescreen is identical to a 30 degree field of view allowing to see as the pilot of the model you are flying!
Skyzone 5.8GHz 32-Channel FPV Goggles
Price: S$551.10add to cart | Inquire now
Back in Stock
The Singahobby 5.8GHz Diversity 7" LCD features dual built-in 5.8GHz receiver, high sensitivity 32-channels, high capacity built-in Lipo battery, auto search function, etc. This compact all-in-one monitor is an excellent choice for RC FPV applications. With its 5.8Ghz transmission, there will not be video interference with 2.4GHz transmitter systems.
Singahobby 5.8GHz Diversity 7" LCD Receiver Monitor
Price: S$255.40add to cart | Inquire now
You can have the Flyzone Eraze completely assembled less than 60 seconds after you open the box. That's less than a minute. But that's not surprising, because all you have to do is snap the rudder in place – and let the magnets do the rest. It arrive with all onboard equipment factory-installed – servos, brushless motor, ESC and propeller. Just put in your receiver and you are ready to fly it with your transmitter.
Flyzone Eraze ARF with Motor, ESC & Propeller
Price: S$123.30add to cart | Inquire now
New! Patrol the Pacific with receiver ready ease!
The Flyzone F4U Corsair is made of cash-tough, feather-light Aerocell foam, which repairs easily with CA adhesives. The F4U is a straightforward, glue-free assembly with a one-piece wing that minimizes building time. It comes with a painted pilot, an outrunner brushless motor, ESC and 4 micro servos, spinner and 9x4.5 propeller in the package.
Flyzone F4U Corsair (Plug and Play)
Price: S$250.50add to cart | Inquire now
Make the Flyzone Tidewater your first — or next — float plane! Fast to assemble without using glue, it boosts your confidence with predictable flight characteristics and easy water handling. Takeoffs are a snap, whether from water, grass or by hand. At full throttle, the Tidewater is fast and powerful. When it’s time to land, just point the plane into the wind, reduce speed and keep the wings level…it almost lands itself!
Flyzone Tidewater Seaplane (Play and Play)
Price: S$236.10add to cart | Inquire now
$6025.00 Now: $3899.00 (35% off). Check out its latest pictures taken in our retail store!
Free yourself. Be a warrior.
The DJI Ronin has been developed for the filmmaking professional. High build quality standards ensure that it keeps up with the demands of rigorous handheld use in trying environments. Simply hold it in your hands to create smooth and stable footage. Custom built ultra-fast processors, extremely accurate sensors, and advanced algorithms, together with fanatical attention to detail has created a system that offers remarkably precise manipulation of control angles - within the range of ±0.02°. This puts world-class, industry leading technology into your hands and creates unparalleled picture and video stabilization.
DJI Ronin 3-Axis Stabilized Handheld Gimbal System
Price: S$3,899.00add to cart | Inquire now
The Singahobby 5.8GHz Diversity 7" LCD Receiver Monitor with Folding Sunshade features dual built-in 5.8GHz receiver, high sensitivity 32-channels, high capacity built-in Lipo battery, auto search function, etc. It comes with a built-in colapsible sunshade and a rear compartment for a 2-cell LiPo in powering the unit. This compact all-in-one monitor is an excellent choice for RC FPV applications. With its 5.8Ghz transmission, there will not be video interference with 2.4GHz transmitter systems.
Singahobby 5.8GHz Diversity 7" LCD Receiver Monitor with Folding Sunshade (No battery)
Price: S$196.90add to cart | Inquire now
Aeroworks is proud to add the New 100cc Extra 300 to their line of QUICK BUILD Series Aircraft. Designed with the customer in mind to provide the highest quality, light weight construction and fastest build time possible.
Aeroworks Extra 300 ARF QB 100cc (Red)
Price: S$1,222.60add to cart | Inquire now
This L size Tettra Filter is suitable for use with gasoline in RC models.
Tettra Gasoline Fuel Filter (L)
Price: S$9.50add to cart | Inquire now
Tahmazo ER282687d Brushless Outrunner Motor is a 700W designed for a equivalent 40-50 size 2-stroke nitro aerobatic model weighing up to 2.6Kg.
Tahmazo ER282687d Brushless Outrunner Motor
Price: S$91.70add to cart | Inquire now
Tahmazo ER181212d Brushless Motor is recommended for use with OK Model's Citron, Marjoram and Safron II gliders. Its motor shaft diameter measures 2.3mm.
Tahmazo ER181212d Brushless Motor (2.3mm)
Price: S$64.70add to cart | Inquire now
Back in Stock
Singahobby Phantom Back Pack is designed for use with all version of DJI Phantom (Phantom 1/2/FC40/Vision/Vision+). Its pre-cut lightweight foam stores your quad and all its accessories in one convenient mobile package!. It features dual zippers for its main compartment. a large front storage and 2 side pockets (mesh and quick-flip).
Singahobby Phantom Back Pack
Price: S$61.74add to cart | Inquire now
Latest! Aeroworks has Raised the Bar!
The QB Series is top quality in both design and performance that will set a new standard for ARF aircraft.
Aeroworks is proud to add the new 30cc Edge 540 to their line of QUICK BUILD Series Aircraft. Designed with the customer in mind to provide the highest quality, light weight construction and fastest build time possible. With the up coming popularity of the smaller gas engines the new 30cc Edge 540 fits the bill. Scale lines, light strong construction and race ready color scheme.
Aeroworks Edge 540 ARF QB 30cc
Price: S$742.80add to cart | Inquire now
New! A BIG boost in performance for 1/8 scale on-road!
Take the winning heritage of the 21XZ-R, combine it with the 21XZ-B's superb features and what do you get? The Speed R2101: a top choice for 1/8 scale on-road!
OS Speed R2101 Engine with 21M2(B) Carburetor
Price: S$559.50add to cart | Inquire now
Futaba R3008SB is a bi-directional communication 2.4GHz Futaba compatible with Futaba radio (eg: Futaba 10J) using the S.BUS2, Standard PWM and S.BUS output ports.
Futaba R3008SB T-FHSS 2.4GHz Receiver
Price: S$70.09add to cart | Inquire now
Propellers that are not properly balanced can cause excessive vibrations that can damage motors/engines and sometimes result in unnecessary crashes. With the Singahobby Carbon Propeller Balancer, you can now you can check for balance of any size propellers with ease and precise accuracy.
Singahobby Carbon Propeller Balancer
Price: S$23.00add to cart | Inquire now
Use these strong Tahmazo magnets to attach your RC aircraft canopy securely with ease.
Tahmazo Canopy Magnets 7mm Diameter (4 pcs)
Price: S$2.20add to cart | Inquire now