JR TLS1-ROT DMSS Rotation Sensor (RPM) is a magnetic detection type rotation telemetry sensor designed for use in JR's DMSS radios. It monitors engine RPM whilst in flight. 

Futaba BLS352 Brushless Servo ideal for use as a steering servo for 1/8 scale buggies, truggies and other applications requiring similar torque and speed. It is equipped with a brushless motor that lasts longer and operates smoother and faster than brushed motors. 

DJI FlameWheel F550 is multi-rotor frame designed for all pilots for fun or AP. With DJI WooKong-M or NAZA autopilot system, it can achieve hovering, cruising, even rolling and other flight elements. It can be applied for entertainment, aerial photography, FPV and other aeromodelling activities. 

This glass-filled nylon Master Airscrew S-2 Series Propeller features high thrust at low rpm and reduced noise. They are designed with a Scimitar shape like a swept-back sword and have narrow tips for high performance. Made in USA. 

Give your airplane models the great scale look with Master Airscrew 3-Blade Series Propellers! These propellers have NACA airfoils and are made of glass-filled nylon for added strength and durability. Each propeller is accurately balanced and hold a true pitch. Made in USA. 

The Kontronik Mini Pyro is the little brother of the Pyro 700. It is developed especially for helicopter applications. Its design follows the same quality philosophy as the PYRO 700. With a rotor length of 20 mm, its new size accomodates well to the performance requirements of modern helicopters. It features 1000W continuous power output for 3D acrobatic models. 

The perfect cooling system of a Kontronik KIRA greatly improves it performance. Its price-performance ratio once again proves to be oustanding. The smallest Kontronik KIRA is designed for sailplanes, sports planes and small hotliners with up to 250W continuous power. Suitable for sailplanes up to 2kg, sport planes up to 1.5kg and hotliners up to 1kg.

The Singahobby Pushrod Measuring Tool II is designed for use with model helicopter building where precise pushrod measurements are required. No more estimations using inaccurate conventional methods!  

The Singahobby High Sensitivity Blade Balancer is designed for use with blades measuring 70 to 700mm long with screw holes of 2 to 5mm in diameter. It features built-in fine-tuning screws for adjustable sensitivity. 

The Singahobby RC Heli Camera Mount Kit S-1000  is suitable for use with DSLR cameras such as D90 or Canon 600D, etc. The adjustable landing gear gear mount is suitable for most 700 class or larger RC helicopters. With 3 sets of 360 degrees servos, the S-1000 is able to drive 3 different axes that produces excellent pictures and smooth video images. 

The Kontronik MinJazz 15 ESC convinces you with lots of functions. Its size is only 36x20 mm but he includes all well known JAZZ features; so the really good RPM control and starting sequence. 

The Velcro Industrial Strength is a heavy duty superior adhesive for most surfaces, including plastic. It is water-resistant and suitable for indoor or outdoor use. Package contains 2 sets measuring 2"x4". Made in USA. 

 Futaba BLS155 is a standard sized brushless servo designed for aircraft applications requiring high torque.

BACK IN STOCK
Glow power isn't the only option anymore. The DLE 20 Engine not only fills the displacement gap, but includes a beam mount to make the glow-to-gas upgrade drop-in fast and easy. A rear pumper carb simplifies installation and adjustment.

With the Techone Aeolus Biplane ARF's slow flight characteristics, you can fly high-alpha 3D with ease. Its carbon fiber reinforced construction provides the solid, precise feel of a balsa profile plane without the weight. This allows you to fly the Techone Aeolus Biplane outside in a windier conditions that would keep most other profile foamies grounded. The Techone Aeolus ARF is another exciting addition to the Techone's outstanding line of electric RC aircrafts and accessories. 

The Pit Lab SkyAssistant Variometer is a small on-board instrument which indicates the RC model's vertical speed by an audible signal. Lift is indicated by a pulsed tone with rate and frequency of the pulses depending on the climb rate. Sink is indicated by a low, continuous tone depending on the sink rate. Audible signal and voice messages about model state are transmitted by built-in radio transmitter and can be received on standard LPD or PMR receiver. 

The Axion RC Alpha 139 is an ARF model suitable for both beginners and advanced pilots. It is constructed of shock resistant Flexpor material with brushless motor, ESC and servos all installed. Just plug in a receiver, grab your radio and you are ready to fly!  

ArduPilot Mega is an open source, Arduino-compatible, pro-quality autopilot. It is the most advanced IMU-based open source autopilot available today, and provides an entire UAV control system with sciptable missions with 3D waypoints, in-flight uploading of commands and powerful ground station software. 

The first Stabilization System built for Scale/Hobby Helicopter Enthusiasts!!!

DJI WooKong-H is the flight system designed for serious scale helicopter enthusiasts providing GPS for self-leveling, position hold, speed control and built-in tail gyro which completely takes the stress out of flying RC helicopters for both professional and hobby applications. DJI WooKong-H can be installed in a variety of models, from small electric helicopters to large gasoline and turbine helicopters.

High-Powered Brushless Aircraft Motors from O.S.!
Pilots loyal to outstanding O.S. performance but eager to fly electric will now have the ideal option — powering electric airplanes using new O.S. brushless motors! The OS OMA-5025-375 High Performance Brushless Motor is designed equivalent for 4-stroke 91 or 2-stroke 50 size airplanes.

MS Composit Swift II Airbrush - Freedom Warrior is a radio controlled park/slow flyer with excellent flight capabilities and extremely easy setup. The SWIFT II construction (extruded poly-propylene - EPP) makes the model very light and highly resistant to physical damage. It is a high performance and agile model capable of advanced aerobatics. Suitable for both beginners and advanced modelers.

The Futaba FR2F1800 is a 6.6V Li-Fe high-capacity and lightweight battery for powering your receiver and high voltage servos. Suitable for use with Futaba 2.4GHz receivers like R6208SB and High Voltage Brushless Servo like BLS156HV, BLS157HV and BLS255HV.

The FrSky TFR4 is a wireless trainer system compatible for use with Futaba FASST 2.4G transmitters for RC training purposes. It is also a 4-channel 2.4GHz FASST receiver that is ideal with Futaba systems. With its ability to have 8 channels CPPM output, it is designed for use with FPV/UAV and quadflyer applications as well. 

The Futaba S9071SB is a programmable digital servo compatible with the Futaba S.Bus System. Ideal for micro/mini helicopter and models where speed and power is essential.